Salivary, acidic and enzymatic degradation of resin composite subjected to different finishing and polishing systems.

PURPOSE: To evaluate the effect of different finishing and polishing systems on the surface roughness of a resin composite subjected to simulated saliva-, acid-, and enzyme-induced degradation. METHODS: 160 specimens (n= 40) were fabricated with Filtek Z350 XT nanofilled composite and analyzed for average surface roughness (Ra). The specimens were finished and polished using: AD - Al2O3-impreginated rubberized discs (medium, fine, and superfine grit, Sof-Lex); SD - silicon carbide and Al2O3-impregnated rubberized discs (coarse, medium and fine grit, Jiffy,); MB - 12- and 30-multiblade burs. The control group (CT) (n= 40) comprised specimens with a Mylar-strip-created surface. Specimens from each group were immersed in 1 mL of one of the degradation methods (n= 10): artificial saliva (ArS: pH 6.75), cariogenic challenge (CaC: pH 4.3), erosive challenge (ErC: 0.05M citric acid, pH 2.3) or enzymatic challenge (EzC: artificial saliva with 700 µg/mL of albumin, pH 6.75). The immersion period simulated a time frame of 180 days. Ra measurements were also performed at the post-polishing and post-degradation time points. The data were evaluated by three-way ANOVA for repeated measures and the Tukey tests. RESULTS: There was significant interaction between the finishing/polishing system and the degradation method (P= 0.001). AD presented the greatest smoothness, followed by SD. After degradation, CT, AD and SD groups became significantly rougher, but not the MB group, which presented no difference in roughness before or after degradation. CT and AD groups showed greater roughness in CaC, ErC and EzC than in ArS. The SD group showed no difference in roughness when the specimens were polished with CaC, EzC or ArS, but those treated with ErC had greater roughness. In the MB group, the lower roughness values were found after using CaC and EzC, while the higher values were found using ErC or ArS. CLINICAL SIGNIFICANCE: As far as degradation resistance of nanofilled composite to hydrolysis, bacterial and dietary acids and enzymatic reactions is concerned, restorations that had been finished and polished with Al2O3-impregnated discs had the smoothest surfaces.

Protective effect of various toothpastes and mouthwashes against erosive and abrasive challenge on eroded dentin: an in vitro study.

The study aimed to compare various toothpastes and mouthwashes on permanent tooth dentin after erosive and abrasive challenges. 130 sound premolars dentin were randomly submitted to an initial erosive challenge and a cycle of erosive and abrasive challenges for five days. The five experimental groups (n = 26) were: (1) Control group (artificial saliva), (2) Elmex erosion protection toothpaste and mouthwash, (3) Vitis anticaries biorepair toothpaste and mouthwash, (4) Oral B Pro-expert toothpaste and Oral B Fluorinse mouthwash, and (5) MI Paste ONE toothpaste and Caphosol mouthwash. Microhardness, surface roughness values, and the topographical characteristics of the dentin surface were assessed. The highest percentage of recovered dentin microhardness (%RDMH) value was observed in groups 2 and 4, followed by groups 5 and 3, respectively. The %RDMH values in groups 2 and 4 did not demonstrate a significant difference (p = 0.855). The highest percentage of improvement in surface roughness was recorded in groups 2 and 4, with no significant differences (p = 0.989). The atomic force microscopy (AFM) findings were consistent with the surface roughness data. The best recovery of dentin microhardness and roughness were measured with the Elmex and Oral B toothpaste and mouthwash, followed by MI Paste ONE toothpaste and Caphosol mouthwash and Vitis anticaries biorepair toothpaste and mouthwash.

Prevention and management of dental erosion and decay.

The 2017 Global Disease Study revealed 2.3 billion untreated cavities and 139 million other oral conditions like dental erosion. Modern treatments prioritise controlling etiological factors and preventing related diseases. This Editorial invites researchers to contribute to the collection, 'Prevention and management of dental erosion and decay'.

The erosive effect of pomegranate juice on enamel: An in vitro study.

AIM: Dental erosion is a chemical-mechanical process that leads to the loss of dental hard tissues. This study aimed to investigate the effect of pomegranate juice on the enamel. METHODS: Enamel blocks were randomly divided into three groups: deionized water, cola, and pomegranate juice. The blocks were immersed in the solutions four times a day for 14 days, and stored in artificial saliva for the remaining period. The surface hardness was measured on days 7 and 14. The surface structures of the demineralized blocks were observed via scanning electron microscopy (SEM), and the depth of demineralization was observed via confocal laser scanning microscopy (CLSM). The pH, calcium, and phosphorus levels of the three solutions were analyzed. RESULTS: The microhardness values of the blocks in the pomegranate juice and cola groups decreased with the increase in the demineralization time. The blocks in the pomegranate juice group exhibited large fractures in the enamel column, whereas those in the cola group had pitted enamels with destruction of the interstitial enamel column. Compared with cola group, fluorescent penetration increased in pomegranate juice (P < 0.01). The pH of cola (2.32 ± 0.09) was lower than that of pomegranate juice (3.16 ± 0.16). Furthermore, the calcium content in pomegranate juice was significantly higher than that in cola (P < 0.01). Alternatively, the concentration of phosphorous in cola was significantly higher than that in pomegranate juice (P < 0.01). CONCLUSION: These findings indicate that pomegranate juice can cause enamel demineralization with an erosive potential comparable to that of cola.

Effect of different brushing parameters on erosive tooth wear in primary bovine enamel and dentin.

This in-vitro study aimed to analyse the effect of brushing and different brushing parameters (kind of toothpaste, kind of toothbrush, brushing force) on erosive tooth wear of primary bovine enamel and dentin. Specimens were prepared from primary bovine enamel or dentin (each group n = 12) and cyclically eroded (6 × 60 s/d, citric acid, pH 2.4) and brushed with children's toothbrushes (2 × 15 s/d) over 5 days. The brushing parameters under investigation were: toothpaste (fluoridated, fluoride-free), toothbrush (manual; rotating-oscillating and sonic, each at two different activation modes) and brushing force (1 N, 2 N). Specimens that were only eroded and not brushed served as controls. Enamel and dentin wear was quantified using widefield confocal microscopy. Statistical analysis was performed using three- and one-way ANOVAs followed by Scheffe's (enamel) or Tamhane's (dentin) post-hoc tests (p < 0.05). Brushing with the fluoridated toothpaste was able to significantly reduce erosive wear in enamel (by 15 to 37%, 6 of 10 groups) and in dentin (by 58 to 72%, all groups), while brushing with the fluoride-free toothpaste was not different from the controls. Considering the kind of toothpaste and brushing force, slight differences between the toothbrushes were observed in enamel, but not in dentin. Within the same toothbrush and activation mode, almost no differences between 1 and 2 N brushing force were detected. In conclusion, erosive tooth wear on primary bovine dental hard tissue mainly depends on the kind of toothpaste, rather than on the kind of toothbrush and the brushing force.

Low-fluoride gels supplemented with nano-sized sodium trimetaphosphate reduce dentin erosive wear in vitro.

OBJECTIVE: The study assessed the effect of low-fluoride gels supplemented with micrometric or nano-sized sodium trimetaphosphate (TMP) on dentin erosive wear in vitro. DESIGN: Bovine dentin blocks (n = 154) were selected by surface microhardness and randomly allocated into seven groups (n = 22/group), according to the gels: Placebo; 4500 ppm F (4500F); 9000 ppm F (9000F); 5% TMP microparticulate plus 4500F (5TMPm+4500F); 2.5% TMP nanoparticulate plus 4500 F (2.5TMPn+4500F); 5% TMP nanoparticulate plus 4500F (5TMPn+4500F); and 12,300 ppm F acid gel (APF). All blocks were treated only once for 60 s and cyclically eroded (ERO, citric acid, 4 × 90 s/day) or eroded and brushed (4 × 15 s/day, five strokes/s, ERO+ABR) over five days (each subgroup n = 11). Dentin wear and integrated hardness loss in depth (ΔKHN) were determined, and the data were submitted to two-way ANOVA, followed by Tukey's test, and Spearman's correlation (p < 0.05). RESULTS: For ERO, all gels containing 4500F supplemented with TMP significantly reduced dentin wear compared with their counterpart without TMP, reaching values similar to 9000F. For ERO+ABR, 5TMPn+ 4500F gel led to significantly lower wear than all its counterparts, reaching values similar to 9000F and APF. As for ΔKHN, all gels containing TMP promoted superior protective effects compared with 4500F, reaching values similar to 9000F and APF under both challenges. A positive correlation between dentin wear and mineral content in depth was verified. CONCLUSIONS: Gels containing 4500F supplemented with TMP significantly reduced dentin erosive wear compared with pure 4500F, with additional benefit from the use of nanoparticles.

Anamnestic risk factors for erosive tooth wear: Systematic review, mapping, and meta-analysis.

OBJECTIVES: Erosive tooth wear is a multifactorial condition. The aim of this systematic review and meta-analysis was to identify key risk factors for erosive tooth wear in permanent dentition. STUDY SELECTION: Observational studies reporting anamnestic risk factors for erosive tooth wear. Methodological quality and risk of bias were assessed using the modified Newcastle-Ottawa scale for cross-sectional studies. Risk factors were visually presented in a heatmap, and where possible, random-effects meta-analyses were performed for the odds ratios (ORs) of risk factors. SOURCES: Electronic databases (MEDLINE, Embase, Scopus, and Web of Science) and manual searches in February 2023. The protocol was registered in PROSPERO (CRD4202339776). DATA: A total of 87 publications reporting on 71 studies were included in the systematic review. The studies examined a variety of anamnestic risk factors (n = 80) that were categorized into ten domains (socio-demographics, socio-economics, general health, oral diseases, medication, oral hygiene, food, beverages, dietary habits, and leisure-related risk factors). Meta-analyses revealed significant associations between erosive tooth wear and male gender (padj.<0.001; OR=1.30, 95 % CI: 1.16-1.44), regurgitation (padj.=0.033; OR=2.27, 95 % CI: 1.41-3.65), digestive disorders (padj.<0.001; OR=1.81, 95 % CI: 1.48-2.21), consumption of acidic foods (padj.=0.033; OR=2.40, 95 % CI: 1.44-4.00), seasoning sauces (padj.=0.003; OR=1.28, 95 % CI: 1.13-1.44), nutritional supplements (padj.=0.019; OR=1.73, 95 % CI: 1.28-2.35), and carbonated drinks (padj.=0.019; OR=1.43, 95 % CI: 1.17-1.75). Most included studies exhibited low bias risk. CONCLUSIONS: Observational studies investigated a variety of anamnestic risk factors for erosive tooth wear. Future studies should employ validated questionnaires, particularly considering the most important risk factors. CLINICAL SIGNIFICANCE: Erosive tooth wear is a prevalent condition. Clinicians should concentrate primarily on symptoms of gastroesophageal reflux disease and dietary factors when screening patients at risk for erosive tooth wear.

Application of digital technology in the repair of functional and aesthetic defects in patients with acid erosion and severe attrition: a case report.

Noncarious lesions, a multifactorial condition encompassing tooth attrition, abrasion, and erosion, have a surge in prevalence and required increased attention in clinical practice. These nonbacterial-associated tooth defects can compromise aesthetics, phonetics, and masticatory functions. When providing full-arch fixed occlusal rehabilitation for such cases, the treatment strategy should extend beyond by restoring dentition morphology and aesthetics. This report details a complex case of erosive dental wear addressed through a fully digital, full-arch fixed occlusal rehabilitation. A 4D virtual patient was created using multiple digital data sources, including intraoral scanning, 3D facial scanning, digital facebow registration, and mandibular movement tracing. With a comprehensive understanding of the masticatory system, various types of microinvasive prostheses were customized for each tooth, including labial veneers, buccal-occlusal veneers, occlusal veneers, overlays, inlays, and full crowns, were customized for each tooth. The reported digital workflow offered a predictable diagnostic and treatment strategy, which was facilitated by virtual visualization and comprehensive quality control throughout the process.

Clinical performance of preheating thermoviscous composite resin for non-carious cervical lesions restoration: A 24-month randomized clinical trial.

OBJECTIVES: This 24-month, double-blind, split-mouth randomized clinical trial aimed to compare the retention rates of a preheated thermoviscous composite resin (PHT) compared to a non-heated composite resin (NHT) in non-carious cervical lesions (NCCLs). METHODS: A total of 120 restorations were restored on NCCLs using a preheated (VisCalor bulk, Voco GmbH) and a non-heated (Admira Fusion, Voco GmbH) composite resins with 60 restorations per group. A universal adhesive in the selective enamel conditioning was applied. In the PHT group, composite was heated at 68 °C for using a bench heater. In the NHT group, no heating was employed. Both restorative materials were dispensed into caps and inserted into the NCCLs. The restorations were evaluated at baseline, 6, 12, 18, and after 24 months of clinical service using the FDI criteria. Statistical analysis was performed with Kaplan-Meier estimation analysis for retention/fracture rate and Chi-square test for the other FDI parameters (α=0.05). RESULTS: After 24 months 108 restorations were assessed. Seven restorations were lost (two for PHT group and five for NHT group), and the retention rates (95 % confidence interval [CI]) were 96.7 % (81.5-99.9) for PHT group and 90.8 % (81.1-96.0) for NHT group, with no statistical differences between them (p > 0.05). The hazard ratio (95 % CI) was 0.52 (0.27 to 1.01), with no significant difference within groups. In terms of all other FDI parameters that were assessed, all restorations were deemed clinically acceptable. CONCLUSIONS: Both composites showed high rates of retention rates after 24 months. CLINICAL SIGNIFICANCE: The clinical performance of the new preheated thermoviscous was found to be as good as the non-heated composite after 24-month of clinical evaluation in non-carious cervical lesions. REGISTRATION OF CLINICAL TRIALS: RBR-6d6gxxz.

Pilot clinical study to evaluate the efficacy of a professionally delivered high fluoride varnish on erosive tooth wear in an in-situ model.

OBJECTIVES: The aim for this pilot study was to investigate the effect of a sodium fluoride varnish on step height measured by a profilometer from human enamel worn by healthy volunteers with a novel in situ/ex vivo erosion design. METHOD: Healthy volunteers aged 18-70 years wore a palatal splint containing 8 human enamel samples and underwent two 3-day treatment periods for 6 h a day with a varnish containing sodium fluoride at 22,600 ppm and the control with the same ingredients but without fluoride. Each splint contained 4 polished and 4 unpolished samples. The interventions were applied to the surface of the enamel samples in randomised order, removed after 6 h, then immersed ex-vivo in 1 %, pH 2.7 citric acid for 2 min, repeated 4 times a day, over 2 days. Measurements of enamel were assessed blindly by microhardness on day 2 and by non-contact laser profilometry on day 3 for the two treatments. RESULTS: 24 volunteers, 2 males and 22 females aged 27-54 years, were screened and recruited. The delta microhardness, from polished samples removed at the end of day 2, for the control and fluoride treatment was 95.7 (22.9) kgf/mm2 and 123.7 (28.9) kgf/mm2, respectively (p < .005). The mean (SD) step height for the control polished enamel surfaces was 3.67 (2.07) µm and for the fluoride varnish was 1.79 (1.01) µm (p < .0005). The control unpolished enamel surfaces had a mean 2.09 (1.53) µm and the fluoride varnish was 2.11 (1.53) µm but no statistical difference was detected. CONCLUSIONS: The results from this pilot study, utilizing an in-situ model where enamel was exposed to acid over the course of 2 days, demonstrated that a high fluoride varnish containing sodium fluoride at 22,600 ppm prevented erosive wear compared to a control on the polished enamel surfaces. CLINICAL SIGNIFICANCE: Intra-oral study demonstrated that a high fluoride varnish containing sodium fluoride at 22,600 ppm reduced erosive tooth wear.

Characteristics of tin-containing fluoride toothpastes related to erosive tooth wear protection.

OBJECTIVES: To assess the effect of different tin-containing toothpastes on the control of erosive tooth wear in enamel and dentin. METHODS: Enamel and dentin slabs were randomly distributed into 7 experimental groups (n = 10/substrate): C-: negative control (Artificial saliva); AmF (regular fluoridated toothpaste without tin); Sn-1 (SnF2/NaF); Sn-2 (SnF2/NaF/SnCl2); Sn-3 (SnCl2/NaF); Sn-4 (SnF2/SnCl2); Sn-5 (SnCl2/AmF/NaF/chitosan). Specimens were submitted to 5-day erosion-abrasion cycling. Surface loss (SL) was determined with an optical profilometer. Tin deposition on the tooth surfaces and some characteristics of the toothpastes (pH, potentially available F-, %weight of solid particles, and RDA) were also assessed. Data were statistically analyzed (α = 0.05). RESULTS: For enamel, the Sn-2 presented the lowest SL, not differing significantly from AmF, C+, and Sn-3. The SL of these groups was significantly lower than the C-, except for Sn-3. Sn-1 and Sn-4 were also not significantly different from C-. For dentin, C- significantly showed the highest SL values, whilst, Sn-1 presented the lowest SL, not differing significantly from AmF, Sn-2, C+, and Sn-3. There was a significant positive association between enamel SL and the pH and tin deposition. Dentin SL was significantly negatively associated with the %weight of solid particles and RDA. CONCLUSIONS: Most of the tin-toothpastes were able to exhibit some protection against ETW. In this process, the toothpastes characteristics play a role, as lower enamel SL was significantly associated with lower pH values and tin deposition; and lower dentin SL was associated with higher %weight of solid particles and RDA of the toothpastes. CLINICAL SIGNIFICANCE: Tin-containing toothpastes can be used for erosive tooth wear protection, but our study showed that their effect depends on the pH, amount of tin deposition, % weight of solid particles and RDA of the toohpastes.

Are S-PRG composites able to resist against erosive and abrasive challenges and protect surrounding enamel in situ?

OBJECTIVES: This study evaluated the resistance of S-PRG (Surface Pre-Reacted Glass-ionomer) composites and other restorative materials against erosive and abrasive challenges and their protective effect on enamel adjacent to the restorations. MATERIALS AND METHODS: Bovine enamel blocks were prepared and randomized into 12 groups, including 6 types of material, each of them subjected to erosion_e or erosion+abrasion_ea: Beautifil II (S-PRG); Beautifil Bulk Restorative (S-PRG); Filtek Z250 XT; Filtek Bulk Fill; EQUIA Forte; Riva Light Cure. Cavities were prepared in the middle of enamel blocks and restored with the materials. Initial profiling measurement was performed on the material and on adjacent enamel (100, 200, 300, 600 and 700 µm from the restoration margin). Palatal intraoral appliances with the restored enamel blocks were used by the volunteers (n = 10). During 5 days appliances were immersed in 2.5 % citric acid for 2 min; 6 × /day (erosion_e). For ea condition, blocks were brushed for 1 min after each acid immersion. Final profile assessment was performed. Data were analysed by two and three way ANOVA followed by Tukey's test (p < 0.05). RESULTS: Material wear: Riva Light Cure showed the highest wear followed by EQUIA Forte and then all resin composites, including the ones with S-PRG (p = 0.000). Enamel wear: there was significant interaction among type of restorative material, wear condition and distance (p = 0.014), enamel around materials showed similar wear (p = 0.983) and the enamel subjected to ea exhibited highest wear (p = 0.000). CONCLUSION: SPRG based composites showed resistance against erosive and abrasive challenges but were not able to protect enamel adjacent to the restorations. CLINICAL SIGNIFICANCE: S-PRG composites exhibit resistance to material wear comparable to resin composites. However, they have shown an inability to effectively protect the adjacent enamel under in situ erosive-abrasive conditions, despite the presence of mineral-loss-preventing ions surrounding materials.

Sports Diet and Oral Health in Athletes: A Comprehensive Review.

Food and fluid supply is fundamental for optimal athletic performance but can also be a risk factor for caries, dental erosion, and periodontal diseases, which in turn can impair athletic performance. Many studies have reported a high prevalence of oral diseases in elite athletes, notably dental caries 20-84%, dental erosion 42-59%, gingivitis 58-77%, and periodontal disease 15-41%, caused by frequent consumption of sugars/carbohydrates, polyunsaturated fats, or deficient protein intake. There are three possible major reasons for poor oral health in athletes which are addressed in this review: oxidative stress, sports diet, and oral hygiene. This update particularly summarizes potential sports nutritional effects on athletes' dental health. Overall, sports diet appropriately applied to deliver benefits for performance associated with oral hygiene requirements is necessary to ensure athletes' health. The overall aim is to help athletes, dentists, and nutritionists understand the tangled connections between sports diet, oral health, and oral healthcare to develop mitigation strategies to reduce the risk of dental diseases due to nutrition.

Dental erosion following clopidogrel administration in a dog: A case-based study.

A 10-year-old neutered male Chihuahua presented with unilateral dental erosion that occurred after several months of oral medications mixed with honey. A pH test was performed on all oral medications administered to the dogs to determine the cause of enamel erosion. Among the medications, the only acidic medication was clopidogrel (pH 2.65). To evaluate the effect of clopidogrel on the tooth surface under the same conditions as in the present patient, an additional preliminary study was designed in which two extracted teeth of another dog were immersed in a clopidogrel-honey mixture or only in honey. After a 3-week soaking of the extracted tooth in the clopidogrel-honey mixture, field-emission scanning electron microscope analysis revealed a rougher surface, whereas energy-dispersive X-ray spectroscopy analysis showed a reduced Ca/C ratio compared to the control tooth. In this case, prolonged exposure of the tooth surface to clopidogrel may be a cause of dental erosion.

Impact of pH-adjusted fluoride and stannous solutions on the protective properties on the pellicle layer in vitro and in situ.

This study evaluates the ideal pH for anti-erosion and anti-adherent efficacy of fluoride and stannous solutions (sodium fluoride (SF), amine fluoride (AF), sodium monofluorophosphate (SMFP), stannous fluoride (SnF2) with 500 ppm fluoride concentration each and stannous chloride (SnCl2, 1563 ppm stannous)). In vitro, solutions were tested at pH 4.5 and 5.5. The main in situ experiments were carried out at the pH of 4.5: For pellicle formation 6 volunteers wore bovine enamel slabs intraorally for 1 min, rinsed with 8 ml solution for 1 min and continued for up to 30 min/8 h. Physiological pellicle samples served as controls. After incubation in HCl (2.0, 2.3) for 2 min mineral release was determined photometrically. Bacterial counts on 8 h biofilms were determined by fluorescence microscopy (BacLight™ and DAPI with Concanavalin A). Modification of the pellicle ultrastructure was examined by TEM. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney-U tests with Bonferroni-correction (p < 0.05). SnF2 showed a significant erosion protection. AF, SnF2, and SnCl2 were most anti-adherent. SnF2 and SnCl2 caused a pronounced basal pellicle with stannous precipitates. Compared to other fluoride monosubstances, stannous ions offer greater protection against erosive acidic attacks. Stannous ions act as crucial co-factor in this process.

The role of calcium in the prevention of erosive tooth wear: a systematic review and meta-analysis.

OBJECTIVES: The loss of hard dental tissue due to recurrent acid challenges and mechanical stresses without bacterial involvement is known as erosive tooth wear (ETW). Many studies in the literature have concentrated on variables that may affect the ETW process and prevent its occurrence or reduce its advancement. However, to date, no previous systematic review has evaluated the role of calcium in preventing ETW. Therefore, the purpose of the present systematic review was to review and critically appraise the scientific evidence regarding the role of calcium formulations in the prevention of ETW. METHODS: The review protocol was registered in the PROSPERO international prospective register of systematic reviews (Ref: CRD42021229819). A literature search was conducted in electronic databases to identify in situ randomized controlled trials evaluating the prevention of ETW following the application of calcium formulations. The outcomes studied included mean enamel loss, surface microhardness, surface roughness, mean erosion/softening depth, mineral loss/precipitation and remineralization. Study characteristics and outcomes of included studies were summarized. Cochrane's risk-of-bias tool 2.0 was used to assess the quality of eligible studies, and meta-analysis using a random effects model was performed. RESULTS: The search retrieved 869 studies of which 21 were considered eligible. Regarding the results of the quality assessment for potential risk of bias in all included studies, overall, 5 studies were considered as being at low risk, another 12 at unclear risk and 4 at high risk of bias. The findings of the studies showed that the addition of calcium in juice drinks led to reduced enamel loss, with blackcurrant juice presenting 2.6 times statistically significant less enamel loss compared to orange juice (p = 0.0001, I2 = 89%). No statistically significant difference in mean surface microhardness of eroded enamel was recorded between chewing gum with or without casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) (p = 0.31, I2 = 71%). Contradictory were the results regarding the effect of milk and CPP-ACP pastes on prevention of ETW. CONCLUSIONS: Calcium formulations play an important role in ETW prevention, mainly through their addition to acidic drinks.

In vitro assessment of dental erosion caused by clear aligners.

The primary objective of this in vitro study was to investigate the erosive potential of enamel under the use of clear aligners (CA), by simulating in vivo conditions experienced by patients who do not remove their CA during the consumption of acidic beverages. In addition, the difference in erosion protection conferred by artificial and human saliva was also evaluated. Sound-extracted human premolars (n = 20) had half of their surfaces protected with acid-resistant nail polish and were randomly distributed into two experimental groups (n = 10): teeth immersed in human saliva or artificial saliva. All teeth had half of their lingual surfaces enclosed by a CA device. The erosive challenges consisted of individual immersion of each sample in citrus acid three times a day, intermediated by immersion in human saliva or artificial saliva for 2 h, during ten days of the erosive protocol. The enamel mineral content was analyzed by high-resolution microtomography. The differential mineral concentration profiles were obtained by subtracting the profile of the mineral concentration of the exposed area and enamel under the CA area from the respective sound area (control). In addition, enamel wear and enamel volume loss were measured. Scanning electron microscopy (SEM) was also performed to analyze the enamel surface. Data were analyzed by two-way ANOVA, followed by the Student-Newman-Keuls test. The enamel wear was higher in teeth immersed in artificial saliva, when compared to human saliva (p < 0.001). The volume loss of the exposed enamel area was lower for tooth immersed in human saliva than in artificial saliva (p < 0.001), during the acid challenge protocol. The use of CA during acid challenges promoted wear and mineral loss of dental enamel, being these changes more pronounced on the enamel surface under the CA. These results open a new path for the development of further studies adopting clinical protocols that promote more accurate responses in the clinical practice during orthodontic treatment.

Hemoglobin Protects Enamel against Intrinsic Enamel Erosive Demineralization.

INTRODUCTION: This study investigated the changes in the acquired enamel pellicle (AEP) proteome when this integument is formed in vivo after treatment with sugarcane-derived cystatin (CaneCPI-5), hemoglobin (HB), and a statherin-derived peptide (StN15), or their combination and then exposed to an intrinsic acid challenge. The effectiveness of these treatments in preventing intrinsic erosion was also evaluated. METHODS: Ten volunteers, after prophylaxis, in 5 crossover phases, rinsed with the following solutions (10 mL, 1 min): control (deionized water-H2O) - group 1, 0.1 mg/mL CaneCPI-5 - group 2, 1.0 mg/mL HB - group 3, 1.88 × 10-5M StN15 - group 4, or a blend of these - group 5. Following this, AEP formation occurred (2 h) and an enamel biopsy (10 µL, 0.01 m HCl, pH 2.0, 10 s) was conducted on one incisor. The biopsy acid was then analyzed for calcium (Arsenazo method). The vestibular surfaces of the other teeth were treated with the same acid. Acid-resistant proteins in the residual AEP were then collected and analyzed quantitatively via proteomics. RESULTS: Compared to control, treatment with the proteins/peptide, mixed or isolated, markedly enhanced acid-resistant proteins in the AEP. Notable increases occurred in pyruvate kinase PKM (11-fold, CaneCPI-5), immunoglobulins and submaxillary gland androgen-regulated protein 3B (4-fold, StN15), Hb, and lysozyme C (2-fold, StN15). Additionally, a range of proteins not commonly identified in the AEP but known to bind calcium or other proteins were identified in groups treated with the tested proteins/peptide either in isolation or as a mixture. The mean (SD, mM) calcium concentrations released from enamel were 3.67 ± 1.48a, 3.11 ± 0.72a, 1.94 ± 0.57b, 2.37 ± 0.90a, and 2.38 ± 0.45a for groups 1-5, respectively (RM-ANOVA/Tukey, p < 0.05). CONCLUSIONS: Our findings demonstrate that all treatments, whether using a combination of proteins/peptides or in isolation, enhanced acid-resistant proteins in the AEP. However, only HB showed effectiveness in protecting against intrinsic erosive demineralization. These results pave the way for innovative preventive methods against intrinsic erosion, using "acquired pellicle engineering" techniques.

Effect of Polyphenols on the Ultrastructure of the Dentin Pellicle and Subsequent Erosion.

INTRODUCTION: Erosive tooth wear is a highly prevalent dental condition that is modified by the ever-present salivary pellicle. The aim of the present in situ study was to investigate the effect of polyphenols on the ultrastructure of the pellicle formed on dentin in situ and a subsequent erosive challenge. METHODS: The pellicle was formed on bovine dentin specimens for 3 min or 2 h in 3 subjects. After subjects rinsed with sterile water (negative control), 1% tannic acid, 1% hop extract, or tin/fluoride solution containing 800 ppm tin and 500 ppm fluoride (positive control), specimens were removed from the oral cavity. The erosive challenge was performed on half of the specimens with 1% citric acid, and all specimens were analyzed by transmission electron microscopy. Incorporation of tannic acid in the pellicle was investigated by fluorescence spectroscopy. RESULTS: Compared to the negative control, ultrastructural analyses reveal a thicker and electron-denser pellicle after application of polyphenols, in which, according to spectroscopy, tannic acid is also incorporated. Application of citric acid resulted in demineralization of dentin, but to a lesser degree when the pellicle was pretreated with a tin/fluoride solution. The pellicle was more acid-resistant than the negative control when modified with polyphenols or tin/fluoride solution. CONCLUSION: Polyphenols can have a substantial impact on the ultrastructure and acid resistance of the dentin pellicle, while the tin/fluoride solution showed explicit protection against erosive demineralization.